Poultry Head And Neck Feather Removal Machine Poultry Plucker

Quick Details

TJ60 Frame type poultry head and neck feather removal machine:

1.   Product features:

  Frame type head and neck feather removal machine ,it is depend on the friction and collision between the duck /goose body and rubber finger to remove the duck and goose’s feather on head and neck, After this machine’s removal feather ,there is no damage to the head and neck’s skin, high efficiency in feather removal. this machine can be combined to use with other feather removal machine ,completely meet hygiene standard.

2.   Technical parameters:

3.   Packaging & Delivery:

Packaging Details

Standard export plywood case packaging for small machine ,for huge machine will be nude package.

Delivery Time

Shipped in 20- 30 days after payment if no stock ,if machine is available ,we will ship it out within 7 days 

4.   Advantages of this machine:

(1) All stainless steel, convenient operation, stable performance, high efficiency and long life.
(2)  Poultry body frict with rubber fingers to remove the head and neck feathers . with a heated shower tube cleaning ,the feathers will flow out at the same time,. 

(3) After coming out from the machine , birds head and neck skin is not damaged, hair removal time is 30s.
(4) The lift mechanism adjustment flexibility, reliable self-locking position.
(5) The cabinet opening and closing mechanism is light and flexible , reset automatically which is easy to maintain and clean.
(6) This machine can be used in combination with other hair removal machine for small, medium and large-scale poultry slaughter lines.

(7) The device has a beautiful appearance and conforms to the national hygienic standard.

5.   Attention:

(1) Install the leakage switch for grounding wire.

(2)Before using the machine, plug in the power and turn on the switch to check whether the discs are running properly.

(3) Use water to clean the feather removal barrel after using.

(4) After a time of using this machine ,the rubber fingers will be worn off ,please replace the rubber finger accordingly to guarantee the good feather removal effect and efficiency.

(5) After a time of using ,if you find the discs rotating speed is slow, it is possible that the belt shaft slips, then please tighten the engine base nut ,note pls don’t adjust too tight. .

6.The method to change the rubber finger of this plucker machine  

(1) Open the machine bank body from the middle of the machine .

(2) Take off the rotating discs with rubber fingers to be replaced .

(3)Use the slotted screwdriver to pry out the broken rubber finger, and then use the screwdriver to press the good rubber finger into the rotating discs holes.maybe it will be a little difficult to press the rubber finger into the rotating discs ,pls add a little lubricant oil or soap water to make it easy to replace the rubbter finger,Then replacing job is finished. 

6.   A general introduction of the line ,it is only for your kindly reference .  

 The Chicken Slaughtering Line is consist of electrical stunning, manual killing, automatic scalding and plucking, semi-automatic evisceration (manual evisceration on conveying line or manual evisceration on the stainless steel table based on customer’s need), automatic pre-chilling, semi-automation dewatering, by-products processing and packing processing.

Below is a simple sheet for your kindly reference:

7.   Payment:

T/T,please arrange pay us 30% as deposit to begin the bulk production,and for balance ,you can pay us after your final inspection and before we book vessel for you.

8.   Delivery time:

We will deliver within 20-30 working days after receiving deposit payment.

9.   Warranty Period:

All our machine is with one year warranty. Within warranty time . Machine breaking caused by machine itself design defect , we are responsible for it .we can provided free charge of breaking part, .If machine 

breaking caused by human factor , user need take responsibility for it , we will provided technical support .

After one year warranty, we will provide spare parts with reasonable cost.

10. After-sales Service:

1.Before deliver the machine, we will test and adjust everything properly.

2. Once all is done, we will contact customer to make final inspection to our factory ,if customer not available ,we will make detailed picture for customer to confirm for delivery.
3. working manual will be provided with the machine, so that clients can use our machine without difficulty.
4. Any problems occur while using, we will provide profession advice and technical support ASAP.
5. Spare parts of the machine is provide whole serving life with reasonable price.

11. Our clients :

12.  About Us

We are a professional poultry slaughter equipments manufacturer over 15 years in China, we can design different capacity poultry slaughter line and supply single function poultry slaughter machines ,we can also supply supporting food equipments for poultry abattoir such as the vaccum packaging machine and sterilization retort and so on,If any need for our machines or any questions for our machine, pls kindly contact me as below :